[1] |
BRITT J, FEREKIDES C. Thin-film CdS/CdTe solar cell with 15.8% efficiency[J]. Appl Phys Lett, 1993, 62(22): 2851.
|
[2] |
MEZHER M, GARRIS R, MANSFIELD L M, et al. Electronic structure of the Zn(O,S)/Cu(In,Ga)Se2 thin-film solar cell interface[J]. Prog Photovolt: Res Appl, 2016, 24: 1142-1148.
|
[3] |
KIM J, HIROI H, TODOROV T K, et al. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter[J]. Adv Mater, 2014, 26(44): 7427-7431.
|
[4] |
JEON N J, NOH J H, YANG W S, et al. Compositional engineering of perovskite materials for high-performance solar cells[J]. Nature, 2015, 517(7535): 476-480.
|
[5] |
CHOI Y C, LEE D U, NOH J H, et al. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and ouantification of traps by deep-level transient spectroscopy[J]. Adv Funct Mater, 2014, 24(23): 3587-3592.
|
[6] |
BANSAL N, O'MAHONY F T F, LUTZ T, et al. Solution processed polymer-inorganic semiconductor solar cells employing Sb2S3 as a light harvesting and electron transporting material[J]. Adv Energy Mater, 2013, 3(8): 986-990.
|
[7] |
FUKUMOTO T, MOEHL T, NIWA Y, et al. Effect of interfacial engineering in solid-state nanostructured Sb2S3 Heterojunction solar cells[J]. Adv Energy Mater, 2013, 3(1): 29-33.
|
[8] |
NIE R, YUN H S, PAIK M J, et al. Efficient solar cells based on light-harvesting antimony sulfoiodide[J]. Adv Energy Mater, 2018, 8: 1701901.
|
[9] |
CHOI Y C, SEOK S I. Efficient Sb2S3-sensitized solar cells via single-step deposition of Sb2S3 using S/Sb-ratio-controlled SbCl3-thiourea complex solution[J]. Adv Funct Mater, 2015, 25(19): 2892-2898.
|
[10] |
GODEL K C, CHOI Y C, ROOSE B, et al. Efficient room temperature aqueous Sb2S3 synthesis for inorganic-organic sensitized solar cells with 5.1% efficiencies[J]. Chem Commun (Camb), 2015, 51(41): 8640-8643.
|
[11] |
ZHANG L, WU C, LIU W, et al. Sequential deposition route to efficient Sb2S3 solar cells[J]. J Mater Chem A, 2018, 6(43): 21320-21326.
|
[12] |
CHEN X, LI Z, ZHU H, et al. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber[J]. J Mater Chem C, 2017, 5(36): 9421-9428.
|
[13] |
YUAN S, DENG H, DONG D, et al. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth[J]. Sol Energy Mater Sol Cells, 2016, 157: 887-893.
|
[14] |
LIU C P, WANG H E, NG T W, et al. Hybrid photovoltaic cells based on ZnO/Sb2S3/P3HT heterojunctions[J]. Phys Status Solidi B, 2012, 249(3): 627-633.
|
[15] |
ESCORCIA-GARCíA J, BECERRA D, NAIR M T S, et al. Heterojunction CdS/Sb2S3 solar cells using antimony sulfide thin films prepared by thermal evaporation[J]. Thin Solid Films, 2014, 569: 28-34.
|
[16] |
MOHOLKAR A V, SHINDE S S, BABAR A R, et al. Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rate[J]. Solar Energy, 2011, 85(7): 1354-1363.
|
[17] |
SUN L, HE J, KONG H, et al. Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by pulsed laser deposition method[J]. Sol Energy Mater Sol Cells, 2011, 95(10): 2907-2913.
|
[18] |
BERERA R, VAN GRONDELLE R, KENNIS J T. Ultrafast transient absorption spectroscopy: principles and application to photosynthetic systems[J]. Photosynth Res, 2009, 101(2/3): 105-118.
|
[19] |
ZHOU P, FANG Z, ZHOU W, et al. Nonconjugated polymer poly(vinylpyrrolidone) as an efficient interlayer promoting electron transport for perovskite solar cells[J]. ACS Appl Mater Interfaces, 2017, 9(38): 32957-32964.
|
[20] |
ZHANG L, JIANG C, WU C, et al. V2O5 as hole transporting material for efficient all inorganic Sb2S3 solar cells[J]. ACS Appl Mater Interfaces, 2018, 10(32): 27098-27105.
|
[21] |
LI S, ZHANG Y, TANG R, et al. Aqueous-solution-based approach towards carbon-free Sb2S3 films for high efficiency solar cells[J]. ChemSusChem, 2018, 11: 3208-3214.
|
[22] |
QIAN X, GU N, CHENG Z, et al. Impedance study of (PEO)10LiClO4-Al2O3 composite polymer electrolyte with blocking electrodes[J]. Electrochimica Acta, 2001, 46(12): 1829-1836.
|
[23] |
NELSON J. The Physics of Solar Cells[M]. London: Imperial College Press, 2003.
|
[24] |
TAN H, JAIN A, VOZNYY O, et al. Efficient and stable solution-processed planar perovskite solar cells via contact passivation[J]. Science, 2017, 355(6326): 722-726.
|
[25] |
LIU M, JOHNSTON M B, SNAITH H J J N. Efficient planar heterojunction perovskite solar cells by vapour deposition[J]. Nature, 2013, 501: 395-398.)
|
[1] |
BRITT J, FEREKIDES C. Thin-film CdS/CdTe solar cell with 15.8% efficiency[J]. Appl Phys Lett, 1993, 62(22): 2851.
|
[2] |
MEZHER M, GARRIS R, MANSFIELD L M, et al. Electronic structure of the Zn(O,S)/Cu(In,Ga)Se2 thin-film solar cell interface[J]. Prog Photovolt: Res Appl, 2016, 24: 1142-1148.
|
[3] |
KIM J, HIROI H, TODOROV T K, et al. High efficiency Cu2ZnSn(S,Se)4 solar cells by applying a double In2S3/CdS emitter[J]. Adv Mater, 2014, 26(44): 7427-7431.
|
[4] |
JEON N J, NOH J H, YANG W S, et al. Compositional engineering of perovskite materials for high-performance solar cells[J]. Nature, 2015, 517(7535): 476-480.
|
[5] |
CHOI Y C, LEE D U, NOH J H, et al. Highly improved Sb2S3 sensitized-inorganic-organic heterojunction solar cells and ouantification of traps by deep-level transient spectroscopy[J]. Adv Funct Mater, 2014, 24(23): 3587-3592.
|
[6] |
BANSAL N, O'MAHONY F T F, LUTZ T, et al. Solution processed polymer-inorganic semiconductor solar cells employing Sb2S3 as a light harvesting and electron transporting material[J]. Adv Energy Mater, 2013, 3(8): 986-990.
|
[7] |
FUKUMOTO T, MOEHL T, NIWA Y, et al. Effect of interfacial engineering in solid-state nanostructured Sb2S3 Heterojunction solar cells[J]. Adv Energy Mater, 2013, 3(1): 29-33.
|
[8] |
NIE R, YUN H S, PAIK M J, et al. Efficient solar cells based on light-harvesting antimony sulfoiodide[J]. Adv Energy Mater, 2018, 8: 1701901.
|
[9] |
CHOI Y C, SEOK S I. Efficient Sb2S3-sensitized solar cells via single-step deposition of Sb2S3 using S/Sb-ratio-controlled SbCl3-thiourea complex solution[J]. Adv Funct Mater, 2015, 25(19): 2892-2898.
|
[10] |
GODEL K C, CHOI Y C, ROOSE B, et al. Efficient room temperature aqueous Sb2S3 synthesis for inorganic-organic sensitized solar cells with 5.1% efficiencies[J]. Chem Commun (Camb), 2015, 51(41): 8640-8643.
|
[11] |
ZHANG L, WU C, LIU W, et al. Sequential deposition route to efficient Sb2S3 solar cells[J]. J Mater Chem A, 2018, 6(43): 21320-21326.
|
[12] |
CHEN X, LI Z, ZHU H, et al. CdS/Sb2S3 heterojunction thin film solar cells with a thermally evaporated absorber[J]. J Mater Chem C, 2017, 5(36): 9421-9428.
|
[13] |
YUAN S, DENG H, DONG D, et al. Efficient planar antimony sulfide thin film photovoltaics with large grain and preferential growth[J]. Sol Energy Mater Sol Cells, 2016, 157: 887-893.
|
[14] |
LIU C P, WANG H E, NG T W, et al. Hybrid photovoltaic cells based on ZnO/Sb2S3/P3HT heterojunctions[J]. Phys Status Solidi B, 2012, 249(3): 627-633.
|
[15] |
ESCORCIA-GARCíA J, BECERRA D, NAIR M T S, et al. Heterojunction CdS/Sb2S3 solar cells using antimony sulfide thin films prepared by thermal evaporation[J]. Thin Solid Films, 2014, 569: 28-34.
|
[16] |
MOHOLKAR A V, SHINDE S S, BABAR A R, et al. Development of CZTS thin films solar cells by pulsed laser deposition: Influence of pulse repetition rate[J]. Solar Energy, 2011, 85(7): 1354-1363.
|
[17] |
SUN L, HE J, KONG H, et al. Structure, composition and optical properties of Cu2ZnSnS4 thin films deposited by pulsed laser deposition method[J]. Sol Energy Mater Sol Cells, 2011, 95(10): 2907-2913.
|
[18] |
BERERA R, VAN GRONDELLE R, KENNIS J T. Ultrafast transient absorption spectroscopy: principles and application to photosynthetic systems[J]. Photosynth Res, 2009, 101(2/3): 105-118.
|
[19] |
ZHOU P, FANG Z, ZHOU W, et al. Nonconjugated polymer poly(vinylpyrrolidone) as an efficient interlayer promoting electron transport for perovskite solar cells[J]. ACS Appl Mater Interfaces, 2017, 9(38): 32957-32964.
|
[20] |
ZHANG L, JIANG C, WU C, et al. V2O5 as hole transporting material for efficient all inorganic Sb2S3 solar cells[J]. ACS Appl Mater Interfaces, 2018, 10(32): 27098-27105.
|
[21] |
LI S, ZHANG Y, TANG R, et al. Aqueous-solution-based approach towards carbon-free Sb2S3 films for high efficiency solar cells[J]. ChemSusChem, 2018, 11: 3208-3214.
|
[22] |
QIAN X, GU N, CHENG Z, et al. Impedance study of (PEO)10LiClO4-Al2O3 composite polymer electrolyte with blocking electrodes[J]. Electrochimica Acta, 2001, 46(12): 1829-1836.
|
[23] |
NELSON J. The Physics of Solar Cells[M]. London: Imperial College Press, 2003.
|
[24] |
TAN H, JAIN A, VOZNYY O, et al. Efficient and stable solution-processed planar perovskite solar cells via contact passivation[J]. Science, 2017, 355(6326): 722-726.
|
[25] |
LIU M, JOHNSTON M B, SNAITH H J J N. Efficient planar heterojunction perovskite solar cells by vapour deposition[J]. Nature, 2013, 501: 395-398.)
|